Key takeaways
- The PYRAMID 3-way mini box system pairs a 3.25-inch woofer, 1.75-inch midrange, and 1-inch tweeter in a compact cabinet. Specs, fitment, and who it suits.
The PYRAMID 3-Way Speaker System is a compact pair of passive mini box speakers built around a 3.5-inch class three-way design. Each cabinet holds a 3.25-inch woofer, a 1.75-inch midrange, and a 1-inch super dome tweeter, with 200 watts of rated power handling and a 4-ohm impedance. It ships as a pair with a mounting kit and speaker wire, for indoor and outdoor use, including home theater and PA setups.
This review sticks to what the listing and the model’s user guide actually publish, and flags what they do not. One point matters most: these are box speakers, not drop-in car door speakers. They need an external amplifier, a bracket mount, and a check of size, mounting depth, and impedance, and the listing leaves several of those details unstated.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The PYRAMID 3-way mini box system is a fair choice for anyone who wants a small, inexpensive pair of passive speakers for a garage, patio, workshop, or small home theater. The three-way layout and 200-watt rating cover the basics, but the 3.5-inch size limits bass, it needs a separate amplifier, and several specs are unstated. Buyers who need a direct car door replacement should look elsewhere.
Key Specs
| Spec | Detail |
|---|---|
| Brand | PYRAMID |
| Model | 2022SX |
| Configuration | 3-way mini box speaker system, sold as a pair |
| Power handling | 200 watts rated |
| Woofer | 3.25-inch long excursion |
| Midrange | 1.75-inch wide dispersion |
| Tweeter | 1-inch super dome |
| Frequency response | 70–21 kHz |
| Impedance | 4 ohms |
| Magnet structure | 24 oz |
| Dimensions (each speaker) | 5.25 x 3.75 x 3.75 inches |
| Enclosure | Bass reflex cabinet |
| Mounting | Wall or ceiling mount; mounting kit and wires included |
| Color | Black |
| RMS power | Not stated |
| Sensitivity | 94 dB SPL (per third-party roundup; not stated in the user guide) |
| Enclosure material | Not stated |
| Weight | Not stated |
| Waterproof rating | Not stated (no IP rating published) |
| First available | Not stated |
Who It’s For
This system suits buyers who already have an amplifier and a place to put two small boxes. A garage, workshop, patio, or small home theater is the natural home for it. The cabinets are small enough to mount on a wall or ceiling without dominating a room, and the included mounting kit and wire mean the install needs little beyond a screwdriver and a run of cable to the amplifier. The three-way layout is a genuine plus at this size: the midrange carries voices and dialogue, the dome tweeter handles the top end, and the long-excursion woofer covers what bass a 3.25-inch driver can manage.
It also suits anyone building a low-cost surround or PA fill setup. As rear or height channels in a small home theater, these boxes add coverage without the footprint of full bookshelf speakers. The 4-ohm impedance matches home and car amplifiers, and the 200-watt rated handling leaves headroom for a modest amp.
Who Should Skip It
Anyone shopping for a drop-in car door speaker should skip this system. These are box speakers with brackets, not coaxial units that bolt into a factory door location. There is no published mounting depth for a factory opening, because that measurement does not apply to a box cabinet, and the cabinet itself is 3.75 inches deep. A buyer who needs a speaker that fits a 3.5-inch factory dash or door cutout should buy a coaxial car speaker made for that location instead.
Buyers without an amplifier should also skip it. This is a passive system: no built-in amplifier, no Bluetooth, no aux input, and no power adapter in the box. It only makes sound when wired to an external amplifier. The same goes for anyone expecting deep bass. The frequency response starts at 70 Hz, and a 3.25-inch woofer cannot move enough air for the low end that a larger speaker or a subwoofer provides. Finally, anyone who needs a published waterproof rating for fully exposed outdoor mounting should look elsewhere, since no IP rating is published for this system.
How It Compares with Typical Alternatives
Against a typical 3.5-inch coaxial car speaker, the difference is form, not just sound. A coaxial car speaker is built to drop into a factory location with a shallow mounting depth and a standard bolt pattern. This PYRAMID system is a pair of boxes on brackets. The box gives it a cabinet and a bass reflex vent, which helps the small woofer, but it cannot substitute for a factory-fit unit.
Against a typical powered Bluetooth mini speaker, the trade is convenience against flexibility. A powered speaker has its own amplifier and wireless input, so it plays straight from a phone. This PYRAMID pair has none of that, but it also has no battery to charge and no built-in amplifier to fail. It fits a wired setup where the amplifier already exists and the speakers are meant to stay put.
Against larger bookshelf speakers, the PYRAMID pair loses on bass and output and wins on size and simplicity. A bookshelf speaker with a 5-inch or 6-inch woofer reaches lower and plays louder, but it takes up more space. This system is the compact, low-cost option for background and fill duty, not the main pair for a serious listening room.
Frequently Asked Questions
Is this a drop-in replacement for factory car speakers?
No. This is a pair of box speakers with wall and ceiling mounting brackets, not coaxial units made for a factory door or dash opening. There is no published mounting depth for a factory location, and the cabinet is 3.75 inches deep. Buyers who need a speaker for a 3.5-inch factory cutout should choose a coaxial car speaker built for that fitment.
Does it need an amplifier?
Yes. The system is passive, with no built-in amplifier, no Bluetooth, and no power adapter. It must be wired to an external amplifier, and the amplifier should be rated for 4-ohm speakers. The 200-watt figure is the rated power handling, not amplifier power included in the box.
What are the dimensions and mounting options?
Each speaker measures 5.25 x 3.75 x 3.75 inches. The system mounts on a wall or ceiling, and the box includes a complete mounting kit and speaker wire. The bass reflex cabinet vents through the enclosure, so the speakers should not be pushed flat against a surface that blocks the vent.
What is not stated in the listing?
Several specs are not published: RMS power, enclosure material, weight, waterproof rating, and first available date. Sensitivity is quoted at 94 dB SPL by a third-party roundup but is not stated in the user guide. The model number, 2022SX, comes from the listing title and the model’s user guide.
Final Verdict
The PYRAMID 3-Way Speaker System is a straightforward, low-cost pair of passive mini box speakers. The three-way driver layout, 200-watt rating, and included mounting kit make it a reasonable pick for a garage, patio, workshop, or small home theater where an amplifier already exists. Its limits are plain: small bass, no built-in amplification, no published waterproof rating, and unstated specs. For a car door replacement or a wireless setup, it is the wrong product; choose a speaker built for the job instead.
You might also like