Key takeaways
- Read the fit list: For trunk racks, use the maker’s vehicle fit list rather than assuming compatibility.
- Tighten and recheck: After installing, tug the rack and bikes firmly, and recheck the straps after the first few miles of driving.
- Do not exceed ratings: Stay within the per-bike and total capacity, and respect your vehicle’s stated hitch tongue-weight limit. If you are unsure, ask the vehicle maker or a qualified installer.
- Visibility: Make sure the rack and bikes do not block lights or the license plate. Local laws vary on this.
- Protect paint: Clean contact points and keep straps from twisting, since dirt under pads can scuff paint.
- Remove loose items: Take off water bottles, bags and lights before driving.
If your car has no hitch, a two-bike trunk rack such as the Allen Sports 102DN is the usual answer under $150, with the Saris Bones 2 as a better-built step up that may exceed the cap; if your vehicle has a 1.25 or 2 inch hitch receiver, a platform hitch rack like the Swagman XC2 is easier to load and more stable, and some hitch racks, notably the Hollywood Trail Rider 2 and Thule Camber 2, sit at or above the top of this budget. Heavy bikes, including most e-bikes, exceed the 35 lb per-bike rating of the budget racks named here.
At a Glance: Bike Racks Worth Considering
| Model | Type | Stated capacity | Other stated details | Best for | Limits |
|---|---|---|---|---|---|
| Allen Sports 102DN (also sold as 102DN-R) | Trunk mount, 2 bikes | 35 lb per bike, 70 lb total | Steel; about 7.5 to 8.8 lb depending on listing; 12 in carry arms; individual tie-downs; padded lower frame; side straps; folds flat; warranty terms set by the maker | Lowest cost, no hitch needed | No locks included; blocks trunk access when loaded; vehicle fit must be confirmed on the maker’s fit list |
| Saris Bones 2-bike | Trunk mount, 2 bikes | 35 lb per bike | About 9 lb (one retailer lists 10.5 lb); adjustable straps; rubber feet; about 6.5 in between bikes; limited lifetime warranty per the maker’s chart | Compact, easy to store; may sit above this cap | No trunk access when loaded; frames without a horizontal top tube need a Bike Beam |
| Swagman XC2 | Hitch platform, 2 bikes | 35 lb per bike, about 70 lb total | Fits 1.25 in and 2 in hitches; wheels 20 to 29 in, tires up to 2.5 in; center arm folds down; push-button ratchet arms; rack weight listed at 25 to 32 lb | Easy loading, stable ride | Needs a hitch; not for trailers or fifth wheels; fat-bike trays sold separately |
| Hollywood Trail Rider 2 | Hitch, 2 bikes | 45 lb per bike | 1.25 in or 2 in hitch; about 90 lb total (older pages say 100 lb and 50 lb per bike); 36.38 lb rack; max wheelbase 60 in; max tire width 3 in | Heavier bikes, wider tires | Heavy rack; the maker says it is not suited to heavier e-bikes; not for front hitches or trailers; may exceed the cap |
| Thule Camber 2 | Hitch platform, 2 bikes | 75 lb total, about 37.5 lb per bike | 1.25 in and 2 in hitches; bikes spaced 7 in apart; about 28 lb rack; tilts for rear access, though retailers disagree on whether it can tilt with bikes loaded | Premium-tier hitch option | Likely above the cap |
How to Choose a Bike Rack
Start With the Vehicle
The vehicle decides the rack type. Trunk racks use straps and padded feet on the trunk lid or hatch and avoid the need for a hitch, but they depend on the vehicle’s shape. The maker of the Allen rack says to check its fit list for specific vehicles, and it lists suitability for sedans, hatchbacks, minivans and SUVs in general terms. Cars with spoilers, unusual rear glass or fragile trunk lids may be poor candidates. Hitch racks need a receiver, and the size matters: Swagman and Hollywood list fit for both 1.25 inch and 2 inch receivers, as does Thule’s Camber.
Bike Weight and Frame Shape
Most budget racks list 35 lb per bike. Many adult mountain bikes and nearly all e-bikes weigh more than that, so look at the weight rating before you buy. Hollywood lists 45 lb per bike for the Trail Rider 2, and Thule lists 75 lb total (about 37.5 lb per bike) for the Camber 2, so neither is a rack for heavy e-bikes. Trunk racks rely on a horizontal top tube. Step-through, kids’ and some full-suspension frames may not sit right, and Saris sells a Bike Beam adapter for frames without a horizontal top tube.
Wheel and Tire Size
The Swagman XC2 lists wheel sizes from 20 to 29 inches and tires up to 2.5 inches wide. One retailer lists 3.5 inches, but the maker’s figure of 2.5 inches is the safer one. The Hollywood Trail Rider 2 lists a maximum tire width of 3 inches and a maximum wheelbase of 60 inches. Fat bikes need special trays, and the Swagman fat-bike trays are sold separately.
Access, Storage and Security
Trunk racks block access to the trunk while loaded and fold flat for storage; hitch racks can tilt or fold the center arm to give access, as with the Swagman XC2. No cable locks are included with the Allen 102DN, and one retailer lists the Thule Camber 2 as non-locking, so plan to buy a separate lock for both bikes and rack if you leave them unattended.
Model Notes
Allen Sports 102DN
This is a steel two-bike trunk rack listed at 35 lb per bike. Listings give rack weights from about 7.5 to 8.8 lb (one outlier gives 11 lb), dimensions of about 23 by 13.6 by 3.9 inches, 12 inch carry arms, individual tie-downs, a padded lower frame and side straps for lateral stability. It arrives assembled and folds flat. Warranty terms are set by the maker, so read them for your market. It is the leading budget choice, but its fit depends on your trunk shape, and the maker’s fit list is the authority.
Saris Bones 2
The Bones carries two bikes at 35 lb each, weighs about 9 lb and uses adjustable straps with rubber feet. It is a trunk rack, so you lose trunk access while it is loaded. Frames without a horizontal top tube need a Bike Beam adapter. It is a step up in build quality in some buyers’ eyes, but the maker’s own listing is well above the budget racks, so it is likely over this cap.
Swagman XC2
A hitch platform rack for up to two bikes at 35 lb each, with push-button ratchet arms and a center arm that folds down to open the trunk or hatch when no bikes are loaded. Rack weight is listed between 25 and 32 lb depending on the source. It is not for use with trailers or fifth wheels. Platform racks hold the wheels rather than the frame, which makes them gentler on bikes and easier to load.
Hollywood Trail Rider 2 and Thule Camber 2
These two are the step-up tier. The Hollywood supports 45 lb per bike and wider tires, while the Thule lists 75 lb total (about 37.5 lb per bike) and 7 inch bike spacing, so the Thule is not the choice for heavier bikes. Both fit 1.25 and 2 inch hitches. Their prices vary, and they may exceed the cap.
Pick X If… Decision Table
| If this is you | Consider | Why |
|---|---|---|
| No hitch, tight budget | Allen Sports 102DN | Trunk rack, 35 lb per bike, folds flat |
| No hitch, want compact storage | Saris Bones 2 | About 9 lb, adjustable straps |
| Have a hitch and want easy loading | Swagman XC2 | Platform design, folds down for access |
| Heavier bikes or wide tires | Hollywood Trail Rider 2 | 45 lb per bike and wider tires; the Thule Camber 2 is rated lower per bike |
| Carry an e-bike | A rack rated for e-bike weight | Budget racks list 35 lb per bike |
Budget Tiers Under $150
Budget tier: Trunk racks like the Allen 102DN, which cover most commuter and recreational bikes within the 35 lb limit.
Mid-range tier: Better-built trunk racks such as the Saris Bones and entry-level hitch platform racks such as the Swagman XC2, depending on the seller.
Premium tier: Heavier-duty hitch platforms such as the Thule Camber 2 and Hollywood Trail Rider 2, with higher weight ratings and wider tire support.
Installation, Fit and Safety Notes
- Read the fit list: For trunk racks, use the maker’s vehicle fit list rather than assuming compatibility.
- Tighten and recheck: After installing, tug the rack and bikes firmly, and recheck the straps after the first few miles of driving.
- Do not exceed ratings: Stay within the per-bike and total capacity, and respect your vehicle’s stated hitch tongue-weight limit. If you are unsure, ask the vehicle maker or a qualified installer.
- Visibility: Make sure the rack and bikes do not block lights or the license plate. Local laws vary on this.
- Protect paint: Clean contact points and keep straps from twisting, since dirt under pads can scuff paint.
- Remove loose items: Take off water bottles, bags and lights before driving.
Alternatives to Consider
- Roof racks: Good if you have crossbars, but loading bikes overhead takes effort and height clearance matters.
- Hatch or spare-tire racks: For SUVs and trucks with a rear spare.
- Truck bed pads and tailgate pads: For pickups.
- Inside the vehicle: Removing the front wheel and using a blanket works for occasional trips.
Frequently Asked Questions
Will a trunk rack damage my car?
It can if it is installed poorly or used on a vehicle it does not fit. Follow the maker’s instructions and fit list, keep contact points clean and avoid overloading. Trunk racks are not recommended on all vehicles, so consult the vehicle manual too.
Can I carry an electric bike on these racks?
The budget racks in this guide list 35 lb per bike, and many e-bikes weigh more. Look for a rack whose maker explicitly rates it for e-bike weight, and consider a ramp or a lighter bike for loading.
What hitch size do I need?
The Swagman XC2, Hollywood Trail Rider 2 and Thule Camber 2 all list compatibility with 1.25 inch and 2 inch receivers. Check your vehicle’s receiver size and the tongue-weight limit in the vehicle manual.
Do these racks come with locks?
No cable locks are included with the Allen 102DN, and one retailer lists the Thule Camber 2 as non-locking. Buy a separate lock for the bikes and, if the rack allows it, for the rack itself.
Can I open the trunk with bikes loaded?
Not with a trunk rack in most cases. Hitch racks such as the Swagman XC2 have a fold-down center arm that helps with access when the rack is unloaded, and tilting designs help with access when loaded.
Which is better, a trunk or hitch rack?
A hitch rack is easier to load and more stable, but requires a hitch. A trunk rack costs less and works without one, but fit depends on your vehicle and it limits trunk access.
You might also like